Setting Up Internet Explorer; Beginning Initial Configuration - ATTO Technology FastStream SC 5500E Installation And Operation Manual

If you do not have a DHCP server, get an IP
address and subnet mask from your network
administrator, type it into the area provided, and
click on Next.
5 Click on Launch Browser.

Setting up Internet Explorer

1 Open your browser.
2 Select Internet Options.
3 In the Internet Options screen, select the
Security tab.
4 Click on the Trusted Sites icon.
5 Click on the Sites button.
6 In the text box Add this Web site to the zone,
add the IP address of the controller. You may

Beginning initial configuration

1 The ExpressNAV interface welcome screen
appears. Click on Enter Here.
2 Type in the user name and password.
Note
The default values are user name root and
password Password. The user name is case
insensitive and the password is case sensitive.
13
ATTO Technology Inc. FastStream SC RAID Controller Installation and Operation Manual
Your browser points to the ATTO ExpressNAV
splash screen. If you use Internet Explorer as a
browser, continue on to the optional
Internet Explorer below. If not, continue on to
Beginning initial configuration
use wild cards.
7 Click on Add.
8 Uncheck the Require server verification
check box.
9 Click OK.
10 At the bottom of the Internet Options box, click
on OK and close the box.
It is best practice to change the default user
name and password. Refer to
current user name, password
3 The Initial Setup page appears. Continue to
Ensure Drive Integrity
Setting up
.
Changing
on page 21.
on page 14.