Raid Level 0: Striping, No Redundancy; Raid Level 1: Mirroring (Duplicate Drives); Raid Level 1 Plus Additional Mirroring - ATTO Technology FastStream SC 5500E Installation And Operation Manual

RAID Level 0: striping, no redundancy

RAID Level 0 (striping) is based on the fact that
increased performance can be achieved by
simultaneously accessing data across multiple drives,
increasing data transfer rates while reducing average
access time by overlapping drive seeks. Drives are
accessed alternately, as if stacked one on top of the
Stripe 1
Stripe 2
Stripe 3

RAID Level 1: mirroring (duplicate drives)

RAID Level 1 ensures the security of data by writing
the exact same data simultaneously to two different
drives. With RAID Level 1, the host sees what it
believes to be a single physical drive of a specific size:
it does not know about the mirrored pair.

RAID Level 1 plus additional mirroring

RAID Level 1 with multiple mirrors uses at least 3
drives with the same data on each drive. This
application offers the highest fault-tolerance with good
xviii
ATTO Technology Inc. FastStream SC Installation and Operation Manual
Disk 1 Disk 2
Data 1 Data 2
Data 5 Data 6
Data 9 Data 10
Disk 1
Data 1
Data 2
Data 3
RAID Level 1: additional mirror
Disk 1
Data 1
Data 2
Data 3
other. RAID Level 0 provides no data protection. If one
drive fails, all data within that stripe set is lost.
RAID Level 0 is used by applications requiring high
performance for non-critical data.
The ATTO FastStream supports 2 to 16 drives per
RAID Level 0 group.
Disk 3
Data 3
Data 7
Data 11
This application is used for critical data which cannot
be at risk to be lost or corrupted due to the failure of a
single drive.
The ATTO FastStream supports an even number of 2
to16 drives per RAID Level 1 group.
Disk 2
Data 1
Data 2
Data 3
performance, especially for small database
applications.
Disk 2 Disk 3
Data 1 Data 1
Data 2 Data 2
Data 3 Data 3
Disk 4
Data 4
Data 8
Data 12