ATTO Technology FastStream SC 5500E Installation And Operation Manual page 27

• Controller name: the controller name is a
unique 8-character identifier which is
displayed at the top of each screen. You may
find this useful if you are managing multiple
ATTO devices from a single workstation.
• Time and date: use a remote time server to
set the time and time zone, or manually set
the time and date. Refer to Date, Time,
TimeZone in Appendix
• Fibre Channel: change the data rate or the
connection mode for each FC port. Refer to
FCDataRate and FCConnMode in
Appendix A.
• Assign a hard address: refer to FCHard and
FCHardAddress in Appendix
A.
A.
• Establish Access through FC Ports:
change whether all drives are to be available
to both ports, creating one node name for
both ports, or if different node names should
be created for each port.
• Ethernet management port: change
whether or not you use DHCP for an IP
address, subnet mask and gateway, or
manually change these parameters and set a
DNS server address. Refer to IPDHCP in
Appendix A.
• When you have completed your changes,
click on Commit.
22