Audio; General Digital Video, General It Or Database - ATTO Technology FastStream SC 5500E Installation And Operation Manual

Physically add or disconnect drives as needed
and rescan.
4 Click Next.
5 Choose an Initialization method (refer to
Initialization on page 17).
6 Choose an Auto-Rebuild option (refer to
Rebuild on page 16).
7 Select a Fault Tolerance (refer to
Tolerance on page
8 Click Commit.
9 A warning box appears.
If you want to continue click Yes. The
configuration completes and the Health and
Status Monitor page appears.
If you wish to start over, click No.The Setup
Wizard page appears.

Audio

1 After choosing Audio, the Audio Setup
Wizard page appears.
Choose to use the same or a different node
name for each host Fibre Channel port.
• If you know you want all drives to be available
or unavailable to all Fibre Channel ports,
select Yes or No. If you do not know, select
Not Sure.
• If you select Not Sure, you are asked a
series of questions to determine the correct
configuration for your needs and setup.
• Several definitions are listed in a grey box at
the bottom of the Audio Setup Wizard
screen which may help you determine
answers to the setup questions.
2 Click on Next.
Note
Depending on your choice and your current
system, the controller may need to restart.
3 If all your drives do not appear in the Find
Drives box, click on System Scan.
Auto-
Fault
17).
This setup requires 4, 6, 8 or 12 drives.
Add or disconnect drives as needed to ensure
you have 4, 6, 8 or 12 drives appearing on the
screen after the scan.
4 Click Next.
5 Choose an Initialization method (refer to
Initialization on page 17).
6 Choose an Auto-Rebuild option (refer to
Rebuild on page 16).
7 Select the number of users for this controller.
8 Depending on the number of users and the
number of drives you have in your system, you
may be asked choose a Fault Tolerance (refer
to Fault Tolerance on page
9 Click Commit.
10 A warning box appears.
If you want to continue click Yes. The
configuration completes and the Health and
Status Monitor page appears.
If you wish to start over, click No. The Setup
Wizard page appears.
General Digital Video, General IT or
Database
1 After choosing General Digital Video, General
IT or Database, the Setup Wizard page
appears.Choose an Initialization method
(refer to Initialization
2 Choose an Auto-Rebuild option (refer to
Rebuild on page 16).
3 If all your drives do not appear in the Find
Drives box, click on System Scan.
4 Click on Commit.
5 A warning box appears.
If you want to continue click Yes. The
configuration completes and the Health and
Status Monitor page appears.
If you wish to start over, click No. The Setup
Wizard page appears.
Auto-
17).
on page 17).
Auto-
18