Discovering The Ip Address - ATTO Technology FastStream SC 5500E Installation And Operation Manual

Exhibit 2.0-2 Back panel I/O plate.
Exhibit 2.0-3 Insert the DIMM module vertically into its slot on the board.

Discovering the IP address

Note
The FastStream is initially configured with
DHCP enabled. It is best if you have access to
a DHCP server.
1 Work from the computer attached to the
FastStream Ethernet port. From the CD
supplied with your FastStream, run the
QuickNav Utility QuickNAV-windows.exe for
Windows or QuickNAV-Mac for Mac OS X.
2 Locate the FastStream with the serial number
recorded earlier.
3 Highlight the serial number.
4 Click Next.
If a DHCP server is available on your network,
an address is assigned automatically by the
server. Note the assigned address:
_____________________________________
12