Additional programs
Program
Special 93°C-10'
Demineralized rinse
Rinse
Drain
Program selection depending on the accessories used
Upper basket
Carrier
2 injector mod-
with spray arm
for various inserts
Area of application
Program for cleaning and thermal disinfection at 199°F (93°C) with
10 minutes' temperature holding time.
The wash water is not pumped away until after disinfection is
complete.
Program for rinsing the wash cabinet and for rinsing wash items
with DI water, holding time: 3 Min.
Program for rinsing the wash cabinet, for flushing out brine (see
"Water softener/Adding reactivation salt"), or for rinsing heavily
soiled wash items, e.g., for pre-rinsing soiling, residual disinfecting
agent, to prevent items drying out, and to prevent incrustation be-
fore running a full load. Cold water is used for rinsing, holding
time: 1 Min
To drain away wash water, e.g., after a program has been canceled
(see "Operation/Canceling a program").
Lower basket
Carrier
ules
for various inserts
Water quantity
2 injector mod-
ules
+ 2.0 to 2.5 L
A 303
(+ 1 module)
Program chart
Program
Normal plus
Standard
Intensive
Inorganic
Organic
Plastics
Mini
Oil program
Injector Plus
Pipettes
165