Problem
Program continued
Peak load cut-out
All settings reset
All program settings reset
Possible cause and solution
This is not a fault.
The process of canceling a program was not completed.
The program which was running continued without inter-
ruption.
This is not a fault!
Individual components of the machine are paused while
there is a peak load signal from your energy management
system.
This is not a fault.
A user has restored factory default settings.
Confirm the message with OK.
This is not a fault!
A user has restored the factory default setting for the pro-
gram.
Confirm the message with OK.
Frequently asked questions
143