Miele PG 8583 CD Operating Instructions Manual page 10

IMPORTANT SAFETY INSTRUCTIONS
10

Label machines which have been taken out of operation and lock
them to prevent them being switched on again without authorization.
The machine may only be put back into operation once it has been
successfully repaired by Miele a Miele authorized technician.

As standard, the drain water of the machine will reach tempera-
tures greater than 160 °F (70 °C). At this temperature, drain water can
potentially damage the drain system. In order to reduce damage to
the drain system, Miele offers an optional drain water cool-down kit.

Personnel operating the machine should be trained regularly. Un-
trained personnel must not be allowed access to the machine or its
controls.

Only use process chemicals which have been approved by their
manufacturer for the relevant application. The manufacturer of the
process chemicals is liable for any negative influences on the material
of the wash items and the machine.

Use caution when handling process chemicals. These may contain
irritant, corrosive or toxic ingredients.
Please observe the process chemical manufacturer's safety instruc-
tions and safety data sheets.
Wear protective gloves and goggles.

The machine is designed for operation with water and recom-
mended additive process chemicals only. Organic solvents and
flammable liquid agents must not be used as this could cause an ex-
plosion, damage rubber or plastic components in the machine and
cause liquids to leak out of it.

The water in the wash cabinet is NOT safe to drink!

Do not lift the machine by protruding parts such as the control
panel or the opened service flap as these could be damaged or torn
off.

Do not sit or lean on the opened door. This could cause the ma-
chine to tip and get damaged or cause injury.

Be careful when sorting wash items with sharp, pointed ends. Po-
sition them in the machine so that you will not hurt yourself or create
a danger for others.

Broken glass can result in serious injury during loading or unload-
ing. Broken glass items must not be processed in the machine.

When operating the machine, beware of the high temperatures in-
volved. If you bypass the electrical lock to open the door, there is a
risk of scalding or chemical burns.

Should personnel accidentally come into contact with toxic vapors
or process chemicals, follow the emergency instructions given in the
manufacturer's safety data sheets.