Changing A Programme; Selecting An Additional Function; Programme Sequence Indicators; Switching Off - Miele G 7856 Operating Instructions Manual

Changing a programme

Provided the START button has not yet
been pressed, a wrongly selected
programme may be changed as
described below (if it has been
pressed, see Cancelling a programme):
^ Turn the programme selector to the
required programme.
^ Select additional function DRYING
3 again if required (see Selecting
an additional function).
^ Press the START button 6.

Selecting an additional function

The following additional function can be
selected:
^ 3 DRYING
Drying may be selected as an
additional function as soon as a
programme has been selected (with
the exception of J SUPER SHORT,
D PRE-RINSE and 6 DRAIN). The
drying phase operates with pulsed
heating for ten minutes. The total
running time of the programme
lengthens accordingly.

Programme sequence indicators

The indicator light for the active
programme stage lights up during the
programme.
k Reactivation
Pre-wash
I
l Main wash
m / H Interim rinse/Final rinse
c
Drying (additional function)
Programme end
The programme has ended when no
more programme sequence indicator
lights are lit up and the "Start" indicator
light 6 has gone out. A 0 will appear in
the middle of the display.
The buzzer will sound at the same time
for a max. of 30 seconds (standard
setting). The buzzer can be changed
(see "Programming special functions").
Use the 4 button to see the total
running time of a programme or the
actual temperature.

Switching off

^ Press and release the I-0 button.
Operation
31