Miele PG 8583 CD Operating Instructions Manual page 112

Program settings
Setting the hold-
ing time
112
The holding time is the duration in which the wash block temperature
is kept constant.
...
Holding time

The duration can be set in 1 minute increments. The possible range is
shown in the bottom line.
If process chemicals are to be dispensed in this wash block, the hold-
ing time will equal at least the DOS exposure time. It is not possible
to set a lower value.
Use the arrow buttons  (higher) and  (lower) to set the holding

time.
Press OK to save the setting.

Holding time
1 Min
(0 - 15 Min )