Settings
72
Volume
A buzzer which is integrated into the control panel can give an acous-
tic signal in the following situations:
- When buttons are pressed (keypad tone)
- Program end
- System messages (information)
Open the menu as follows:
button
Settings
Volume
Buzzer tones
-
Setting the buzzer volume for program end and system messages
(information).
-
Keypad tone
Setting the buzzer volume for keypad tone.
Select an option using the and arrow buttons.
Confirm your selection with OK.
Keypad tone
When
Buzzer tones
mediately. When
lect for which tone,
the volume.
Keypad tone
Quieter
The volume level is represented by a bar chart. On the lowest setting
the buzzer tone is switched off.
Use the arrow buttons (
Press OK to save the setting.
Volume
Keypad tone
Buzzer tones
has been selected, you can adjust the volume im-
has been selected, you must first se-
Warning
Program end
or
Louder
Louder
and (
, you would like to adjust
Program end
Quieter
Louder
Quieter
) to set the volume.