Miele PG 8583 CD Operating Instructions Manual page 139

Problem
Fault 426, 526
Fault 433
Possible cause and solution
Wash pressure is too low.
– Wash pressure is too low due to a heavy build-up of
foam. Spilled rinsing agent may not have been cleaned up
after being added.
Follow the instructions regarding foam build-up in

"Chemical processes and technology".
Rinse
Start the program to clean the wash cabinet.

– The load carriers were loaded incorrectly or overloaded.
Use only mobile units, baskets, modules, and inserts

suitable for the particular application.
Arrange hollow or deep-sided wash items so that water

runs off them freely.
– The water lines are clogged or leaking.
Check and clean the filters in the wash cabinet and spray

arms.
Check the injector bars for possible leaks, e.g.,:

– Are all caps and end caps in place?
– Are all connections installed with nozzles, irrigation
sleeves, hose adapters, or other irrigation connectors?
– Are installed silicone hoses undamaged?
Check the washer's water connectors in the back panel

of the wash cabinet to ensure that they are attached
tightly, and remove any blockages.
– The amount of water is insufficient for the application.
Increase the amount of water (see "Program settings"). If

necessary, consult Miele Customer Service.
Protruding wash items or other objects, e.g., towels, are
preventing the door from being closed properly by the
Comfort lock.
Remove all objects and sort the wash items so that they

do not obstruct the door.
Close the door.

Frequently asked questions
139