Miele PG 8583 CD Operating Instructions Manual page 28

Commissioning
Commissioning
completed
Fault 420
28
Commissioning is completed when the following message is dis-
played.
Confirm the message with OK.

The machine is now ready for use.
The settings made during the commissioning process are only
adopted after a complete program has been run.
Select any program, e.g.:

Press the Start/Stop button to start the program.

After commissioning, every program starts with reactivation of the
water softener.
If the program is canceled using
tions are deactivated.
Confirm the error message with OK.

Use the  button to switch the machine off.

Wait approximately 10 seconds before switching the machine on

again with the  button.
The commissioning procedure starts again.
Perform commissioning and activate at least one plumbing connec-

tion; e.g. for cold water.
Set up successful
Normal plus
Temperature
75 °C
Duration
1:30
Drain .
Fault 420
h
, all the plumbing connec-