Switching on
The machine must be connected to the electrical supply.
Press the button until the button's LED lights up.
After that, the display shows the following:
As soon as the machine is ready for operation, the display changes to
show the last selected program, e.g.:
If the machine is being used for the first time, or if the factory default
settings have been reinstated, some basic parameters, e.g., lan-
guage, date, time, etc., must first be set. To enable this, the display
automatically changes to the relevant screen.
Switching off
Press the button.
Auto-off function
To save energy, the machine has an Auto-off function. If the machine
has not been used for a specific time period, it switches itself off au-
tomatically; see "Additional settings/Switch off after".
Use the button to switch the machine on again.
Ready for operation (standby)
When it is ready for use (standby), the machine remains switched on,
the button flashes, and the time is shown on the display. Pressing
any button reactivates the machine. Standby can be switched on and
off as required; see "Additional settings/Switch off after".
PG 8583 CD
Normal plus
Temperature
75 °C
Duration
1:30
Operation
h
21