Drying - Miele PG 8583 CD Operating Instructions Manual

Operation

Drying

Activating and de-
activating drying
If drying is deacti-
vated
56
The additional "Drying" function accelerates the drying process at the
end of the program.
When the drying function is activated and the door is closed, the dry-
ing system feeds heated and HEPA-filtered air into the wash chamber
for active drying of the load. The heated air is discharged through the
steam condenser and can be cooled down if necessary (see "Addi-
tional settings/Air cooling").
The drying function can be preselected for all programs with a drying
phase or can be retrospectively switched on or off every time a pro-
gram is selected (see "Settings /Drying").
Drying is activated or deactivated prior to program start by pressing
the  button. The LED in the button  indicates whether the addi-
tional function is on or off. The drying time of the program can also be
changed.
When the drying function is activated, the program runs longer.
Select a program.

Press the  button before the program starts.

Drying time
If the drying time (
in the program settings, the time set can be altered. Otherwise, the
drying time set cannot be changed.
If the drying function was deactivated previously, it can be activated
by pressing a button.
If the time is set as changeable, the preset drying time for this pro-
gram is shown in minutes (min) in the display and the possible setting
range is displayed in the bottom line.
Use the arrow buttons  (higher) and  (lower) to change the dry-

ing time and pressOK to save the setting. Drying is now activated.
) is set as changeable (
Drying
30 Min
Min )
(0 - 120
Time changeable?
)