Connecting The Neckstrap To The Otoread - Interacoustics OtoRead Instructions For Use Manual

2.4.5

Connecting the neckstrap to the OtoRead

D-0116684-B – 2020/03
OtoRead™ - Instructions for Use - US
TM
The provided neckstrap can be connected to the OtoRead
for easy transportation and handsfree testing.
To connect the neckstrap:
1. Insert the loop of the neckstrap into the hole on the
back of the OtoRead
it comes out the hole on the top of the OtoRead
2. Thread the necktrap through the loop.
3. Pull the neckstrap to secure it in place.
and push the loop through until
TM
TM
.
TM
Page 13