Advanced Options For Teoae Testing (Te Menu) - Interacoustics OtoRead Instructions For Use Manual

Save protocol
3.18.9.8

3.18.10 Advanced options for TEOAE testing (TE menu)

General
3.18.10.1
The TE protocol settings menu is reserved for those devices purchased as either a Standard or Clinical
version. Screener and Screener Plus versions of the OtoRead
the default screening protocol's parameters cannot be changed.
The TE protocol settings menu permits modification of the test parameters and detection criteria for the
customizable TE protocols. Changes to protocols should be made only by qualified personnel. If you are not
familiar with the parameters and how changing them can affect test outcomes, do not attempt to change the
protocols.
The OtoRead comes with pre-programmed protocol settings. See Appendix C for the manufacturer
TM
settings of these protocols. Test protocol changes are saved in the non-volatile memory so the settings will
be retained even when changing the batteries.
Customizing a test protocol
3.18.10.2
To enter the TEOAE Menu:
1. Press CHANGE at the Main menu.
2. Using the CHANGE keys, select the TEOAE protocol you want to customize (the 'TE 64s' protocol
is not customizable).
3. Press SETUP key at the Protocol menu.
4. At M1 (Date and time settings menu), the pulsing arrow appears. Hold down the
3 seconds until the 'READY' light (green LED) turns off.
5. At M2 (Device settings menu) the pulsing arrow appears again. Hold down the
seconds until the 'READY' light (green LED) turns off.
6. The device is now in the TE menu (indicated by TE in the top left corner of the screen).
From the TE menu, you can now scroll through the available protocol parameters using the
and make changes by using the LEFT or RIGHT keys.
D-0116684-B – 2020/03
OtoRead™ - Instructions for Use - US
Once all of the parameters have been set for the protocol, these
settings can be saved by pressing one of the SAVE keys.
To exit without saving protocol setting changes press the
key to return to the Main menu.
When one of the SAVE keys have been pressed, CUSTOM
PROTOCOL SAVED will be displayed as confirmation. Press the
DONE key to return to the Main menu.
The TE protocol settings menu can be recognized by the abbreviation
'TE' in the top left corner.
device do not have access to this menu as
TM
DONE
CHANGE key for
CHANGE key for 3
NEXT key
Page 48