2.3.3 Explosion Hazards; Electromagnetic Compatibility (Emc); 2.3.5 Cautions - General - Interacoustics OtoRead Instructions For Use Manual

2.3.3 Explosion hazards

WARNING

2.3.4 Electromagnetic compatibility (EMC)

CAUTION
2.3.5 Cautions – General
CAUTION
D-0116684-B – 2020/03
OtoRead™ - Instructions for Use - US
The instrument is not protected against ingress of water or other liquids. If
any spillage occurs, check the instrument carefully before use or return for
service
No part of the equipment can be serviced or maintained while in use with
the patient.
Do NOT use in the presence of flammable gaseous mixtures. Users should
consider the possibility of explosions or fire when using this device in close
proximity to flammable anesthetic gases.
Do NOT use the instrument in a highly oxygen-enriched environment, such
as a hyperbaric chamber, oxygen tent, etc.
Before cleaning make sure to disconnect power source
Although the instrument fulfills the relevant EMC requirements, precautions
should be taken to avoid unnecessary exposure to electromagnetic fields,
e.g., from mobile phones, etc. If the device is used adjacent to other
equipment it must be observed that no mutual disturbance appears. Please
also refer to the appendix regarding EMC.
Use of accessories, transducers and cables other than specified, with the
exception of transducers and cables sold by Interacoustics or
representatives, may result in increased emission or decreased immunity of
the equipment. For a list of accessories, transducers and cables that fulfil
the requirements please also refer to the appendix regarding EMC.
If the system is not functioning properly, do not operate it until all necessary
repairs are made and the unit is tested and calibrated for proper functioning
in accordance with Interacoustics' specifications.
Do not drop or in any other way cause undue impact to this device. If the
instrument is damaged, return it to the manufacturer for repair and/or
calibration. Do not use the instrument if any damage is suspected.
This product and its components will perform reliably only when operated
and maintained in accordance with the instructions contained in this manual,
accompanying labels, and/or inserts. A defective product should not be
used. Make sure all connections to external accessories are secured
properly. Parts which may be broken or missing or are visibly worn,
distorted, or contaminated should be replaced immediately with clean,
genuine replacement parts manufactured by or available from
Interacoustics.
Page 8