Accessing The Menus - Interacoustics OtoRead Instructions For Use Manual

Hide thumbs Also See for OtoRead:

Table of Contents

3.18.2

Accessing the menus

D-0116684-B – 2020/03

OtoRead™ - Instructions for Use - US

To access the different menus, press the

Main Menu screen.

The Protocol Menu screen allows the user to change the test

LEFT or RIGHT

protocol using the

protocol is displayed on the screen, press the

to the Main Menu and begin testing.

To access the Setup menus M1, M2, DP and/or TE press the

DOWN key from the Protocol menu.

The first accessible menu is M1, indicated by M1 in the top left

hand corner of the screen. You will notice that the

is pulsing in blue. To adjust the date and time settings, press the

DOWN key once. To move to M2, press and hold down the

DOWN key for 3 seconds until the 'READY' light (green LED)

turns off, and then release the key.

The pulsing

DOWN key on the display indicates a long press

is required to move to the next menu.

To access the TE or DP menus, you must have selected the

relevant protocol. E.g., to access the DP menu, a DP protocol

must have been selected and appear on the Main Menu screen.

DP and TE menus are not accessible in the OtoRead

and Screener Plus Version.

DOWN key from the

key. Once the desired

UP key to return

DOWN key

Screening

Page 39

Table of Contents