Table of Contents
Advertisement
REPLACING THE POWER SUPPLY AFTER INSTALLING ACCESSORIES
1
Ensure that you have installed all your accessories in the PC.
2
Replace the power supply on the left-hand side of the PC, and ensure that the cables are
neatly routed around any accessory boards.
3
Raise the front of the power supply and engage the hinge on the rear.
4
Lower the front of the power supply into position so that it rests on the front panel.
INSTALLING MEMORY
Main Memory Modules
Your PC is supplied with main memory. If you need more main memory to run your application
software, you can install up to a total of 128 MB.
Main memory is available in modules of 4 MB, 8 MB, 16 MB, or 32 MB. You must install
identical modules in pairs in each bank.
Banks A and B will take 4 MB, 8 MB, 16 MB or 32 MB modules. Use only 4 MB and 16 MB
modules in bank C, as 8 MB and 32 MB modules are not fully detected in this bank.
CAUTION:
Turn all equipment OFF. Don't let your clothes touch the accessory.
To equalize the static electricity, rest the accessory bag on top of the power supply while you
are removing the accessory from the bag. Handle the accessory as little as possible and with
care.
Static electricity can damage electronic
components.
Advertisement
Table of Contents
