Disconnecting/Connecting Fine-Wire Coaxial Cable - Sony HDCU3500 Service Manual

Type H
Disconnecting
Latch
Connector
A
1. Open the latch of the connector in the direction of arrow A to unlock.
2. Disconnect the flexible flat cable.
Connecting
Latch
Connector
B
Flexible flat cable
Insulated side
1. Insert the flexible flat cable firmly as far as it will go with the insulated side up.
2. Close the latch of the connector in the direction of arrow B to lock the flexible flat cable.
1-8-2.

Disconnecting/Connecting Fine-Wire Coaxial Cable

Note
• Be very careful when handling the fine-wire coaxial cable so that fine wires are not disconnected.
• When disconnecting the fine-wire coaxial cable, be sure to hold the connector. Do not attempt to pull the cable.
• Check that the contact surface of the fine-wire coaxial cable connector is not contaminated.
Type A
Disconnecting
Connector
Connector
1. Hold both sides of the fine-wire coaxial cable connector, and pull the connector straight to disconnect it.
HDCU3500/HDCU5500
Flexible flat cable
Fine-wire coaxial cable
Correct
Hold the connector to disconnect.
Wrong
Do not attempt to disconnect by
pulling the cable.
1-20