Sony HDCU3500 Service Manual page 72

2. Remove the HIF-76 board.
(1) Open the clamper, and then remove the fine-wire coaxial cable.
(2) Disconnect the two fine-wire coaxial cables from the connectors (CN001 and CN002) on the HIF-76 board.
(3) Remove the four screws, and then remove the HIF-76 board.
Fine-wire coaxial cable
BNC board bracket
P2.6 x 5
Tip
When replacing the fine-wire coaxial cable, attach the new tape AS to the same position.
3. Install the removed parts by reversing the steps of removal.
HDCU3500/HDCU5500
CN001
HIF-76 board
CN002
Fine-wire coaxial cable
Fine-wire coaxial cable
Clamper
HIF-76 board
Tape AS
2-38