4.
Remove the DC fan (60 square).
(1) Remove the duct PS in the direction of the arrow.
Tip
The duct PS is secured by the projection of the duct PS. Unhook the projection, then remove the duct PS.
(2) Remove the DC fan (60 square) in the direction of the arrow.
Note
• When attaching the duct PS, be careful not to catch the harness.
• When attaching the DC fan (60 square), pay attention to the position of label and harness.
5.
Install the removed parts by reversing the steps of removal.
HDCU3500/HDCU5500
Label
DC fan (60 square)
Front side
Projection
Duct PS
2-22