Board/At-195 Board - Sony HDCU3500 Service Manual

2-7. SY-467 Board/AT-195 Board
Preparation
1. Remove the top cover. (Refer to
2. Remove the optical cable. (Refer to step 1 in
3. Remove the top chassis. (Refer to step 1 in
Procedure
1. Disconnect the fine-wire coaxial cable from the connector (CN600) on the SY-467 board.
2. Remove the two screws, and then remove the SY-467 board in the direction of the arrow.
3. Remove the two screws, and then remove the AT-195 board.
B to B connectors
PSW
3 x 8
(a)
SY-467 board
Front side
HDCU3500/HDCU5500
"2-2. Top Cover".)
"2-4-1. LEMO Connector
"2-5. Top Chassis/Air Distributor
Fine-wire coaxial cable
B to B
connectors
Assembly".)
Assembly".)
CN600
(b)
AT-195 board
(a)
PSW
3 x 8
(b)
B to B connectors
2-16