Connecting/Disconnecting The Flexible Card Wire - Sony HXCU-100 Service Manual

2-2. Connecting/Disconnecting the
Flexible Card Wire
The fl exible card wires are used to connect between the
boards in this unit. Life of fl exible card wire will be signifi -
cantly shortened if it is bent. Be very careful not to bend
the fl exible card wire.
Three types of different-shaped connectors are used in this
unit. (Type A to type C)
Because the direction of the fl exible card wire is different
depending on the shape of the connector, be careful when
connecting the fl exible card wire.
Disconnecting
1. Turn off the power.
2. Raise the portion A in the direction of the arrow to
unlock and pull out the fl exible card wire.
Connecting
m
. Do not insert the fl exible card wire sideways.
. Confi rm that there is no stain or dust on the contact
surface of the fl exible card wire.
. When connecting the fl exible card wire, check the con-
nector shape, and great care should be taken for the
direction of the contact surface or isolation surface
(blue).
(Refer to illustration of the type A to type C.)
1. Raise the portion A in the direction of the arrow and
securely insert the fl exible card wire into the deep end
of the connector.
2. Return the portion A to its original position and lock
the connector.
2-2 (E)
Type A
Type B A
Connector
Type C
Isolation surface
(blue)
A
Connector
Isolation surface (blue)
Isolation surface (blue)
Connector
A
HXCU-100