Usable Cans; Intended Use; Identifying Information - corob FLEX 200 User Manual

Bung Hole Locator (B. H. L.)
This is a system that emits laser beams that allow the positioning of pre-punch cans, so
that the hole is in line with the center of the dispensing nozzle.

2.3 Usable cans

MAX
MIN
MIN
380 mm (15") 140 mm (5.5") 320 mm (12.6") 70 mm (2.8") 25 mm (1") 35 kg (77 lb)
2.4 Intended use and reasonably foreseeable misuse
The machine is intended for professional use to dispense colorants in small, medium and large point of sales or
professional paint stores.
The machine must be used only with cans within the limits set forth in chapter 2.3 (Usable cans), with the colorants
specified in the table of chapter 8.1 (Technical data) and according to the procedures described in this manual.
Any use of the machine other than that stated, which cannot be implied or deduced from this manual, is to be
considered improper and unintended therefore it voids any manufacturer's liability arising from non-compliance with
these requirements.

2.5 Identifying information

The machine has an identification plate (chapter 3.4) indicating:
1. Manufacturer's name.
2. Marking.
3. Machine model.
4. Month and Year of manufacture.
5. Serial number.
6. Electrical specifications.
Do not remove or tamper with the identification plate in any way.
FLEX 200 - 8 -