Residual Risks - corob FLEX 200 User Manual

3.3 Residual risks

Risk
Risk of electrocution - Risk of electrical shock
if you power the machine from a socket not
equipped with ground connection.
Risk of electrocution - Risk of electrical
shock if you access machine parts protected
by panels without first cutting off electrical
power.
Dorsal/lumbar injuries - Handling heavy
loads when moving the machine and loading
cans on the shelf may cause injuries.
Risk of crushing / entanglement / dragging
- During machine operation, the rotation of
the turntable takes place automatically.
Risk of falling objects / crushing - When
positioning a can on the shelf, there is a risk it
may fall onto the operator.
Risk of crushing / impact - Placing an
excessive load on the shelf or on the monitor
support arm (optional) may cause the
machine to loose stability.
Risk of crushing / entanglement - During
colorant refilling operations, the stirrer inside
the canister may automatically start rotating.
Risk of slipping / falling - Misuse of the shelf
may cause injuries.
Risk of burning - Setting too high time and
frequency stirring values causes the canister
stirring motors to get overheated.
Risk of poisoning and sensitization - Fumes
generated by the colorants used may cause
poisoning and/or sensitization during canister
refilling operations, machine cleaning and
disposal.
Preventive measure
Power the machine through a grounded
socket outlet.
It is recommended to earth the machine
body.
The operator is not authorized to access the
machine parts protected by panels.
For the maintenance technician: before
performing any maintenance intervention,
shut off the machine and disconnect the
power supply cable from the mains socket
outlet.
Do not exceed the weight limits stated by the
current regulations in force (20 kg for women,
25 kg for men).
If necessary, use appropriate
equipment.
The machine must be used by a single operator.
Unauthorized people who could reach or
touch machine parts during operation must
not be admitted in the nearby area.
Position the can so that the whole base rests
on the shelf surface.
Do not exceed the maximum load allowed.
On the shelf: 35 kg (77 lb)
Before performing any intervention, press
the off-line button.
Do not climb onto the shelf and/or sit on it.
Do not use the shelf as a ladder.
Set a stirring time lower than 30 minutes and
the interval between one stirring process and
another equal to or higher than the stirring
time.
Read the warnings reported in the Material
Safety Data Sheets of the colorants used.
The MSDS must be provided by the colorant
manufacturer.
Keep the room suitably ventilated.
- 11 -
Re. in the
P.P.E.
manual
\ ch. 5
\
ch. 4 - 6
lifting
ch. 6
ch. 6
ch. 6
ch. 6.4
\
ch. 6.2.1
ch. 6.3
Personal
Protective
ch. 3.2 - 4
Equipment
- 6 - 7
as specified
in MSDS.
FLEX 200