General Information; Purpose And Use Of This Manual; Conventionally Used Graphics; Definitions - corob FLEX 200 User Manual

1 GENERAL INFORMATION

1.1 Purpose and use of this manual

Read this manual carefully before using the machine.
This manual, inserted in the product packing, contains instructions on the use and routine maintenance needed to
uphold the machine's performance over time. The manual contains all information needed to correctly use the machine
and avoid any accident.
The manual is to be considered an integral part of the machine and must be stored until it is fully dismantled.
The manual contains all information available at the time of preparation regarding the machine and any accessories; for
accessories, the manual includes any variations or changes that involve different operating procedures.
Should it be lost or partially ruined, so that its contents can no longer be read in full, you must request a new manual
from the manufacturer.
If the images contained in this manual show the machine without the guards and/or employees without personal
protective equipment, it is only for the purpose to make clearer the discussion of the issues.
Some of the illustrations in this manual were taken from prototypes; some details may differ on machines in standard
production.

1.1.1 Conventionally used graphics

Boldface type is used to highlight notes or information of particular importance to a topic.
DANGER
Indicates a risk of personal injury.
WARNING
Indicates a risk of damage to the machine that could interfere with its operation.
Indicates important instructions referring to precautionary rules and/or measures to adopt.
Indicates situations and/or operations that involve the management software installed on the computer.
Indicates that to carry out the intervention described, the use of the specified tools is required.

1.2 Definitions

OPERATOR
A person familiar with the methods to produce paints or similar products, trained and authorized to operate and use
the machine by its controls and to load and unload production materials with all safety devices installed and enabled.
He or she must work only in safety conditions and is allowed to carry out routine maintenance operations.
MAINTENANCE TECHNICIAN/INSTALLATION TECHNICIAN
Specialist prepared and trained in a technical field (mechanical and electrical) and assigned by the manufacturer to
work on the machine to perform machine installation, adjustments, repair breakdowns or carry out maintenance.
- 5 - FLEX 200