Correct Use; Performance - Sensopart FT 50 RLA 70-L8 Mounting And Operating Instructions

Mounting and
operating instructions
3

Correct use

The FT 50 RLA is an optical sensor and measures distances without contact. Object thickness or differences
in thickness can be measured using two FT 50 RLA (type S1 only).
WARNING
The product is not approved for the protection of personnel (no safety component according to
Machinery Directive).
4

Performance

• Operating range 30 ... 100 mm or 80 ... 300 mm
• Analogue output 4 ... 20 mA
• 2 digital outputs
• Compact casing 50 x 50 x 17 mm
• High resolution
• Type S1 with bus-cmpatible, serial RS485 interface
• "Teach-in" settings also type S1 possible per PC-software
• Wide functional range
Mode of function
The FT 50 RLA sensor measures according to the principle of triangulation. The distance between the object and
sensor is determined on the basis of the position of the light spot on the detector.
Operating range (Factory setting)
On
OK LED (green)
(Good Target)
Off
20 mA
Analogue
output
(invertible)
4 mA
FT 50 RLA 70
FT 50 RLA 220
FT 50 RLA Disctance sensor - GB - 068-13671 - 20.04.2009-05
30 mm
80 mm
100 mm
300 mm
Illustr. 3
15500271
45