Distance Measured Values; Operating Measured Values - Sensopart FT 50 RLA 70-L8 Mounting And Operating Instructions

Example telegram
(in the example, the sensor has the address 1, Q
Master telegram
Designation
1. Byte Address
2. Byte Length
3. Byte Command
4. Byte Data
5. Byte Check sum
8.5.18

Distance measured values

Command (Byte 3): decimal 65; hexadecimal 0x41
Parameter: no
Reply (Byte 3): decimal 89; hexadecimal 0x59
Parameter: Data
Reads out the current distance to the object (raw data). Altered characteristic settings (4 mA point, 20 mA point, Min,
Max, autom. centre ...) are not taken into account. The analogue output is not affected, it always transmits measured
operating values.
Example telegram
(in the example, the sensor has the address 1)
Master telegram
Designation
1. Byte Address
2. Byte
Length
3. Byte Command
4. Byte
Check sum
8.5.19

Operating measured values

Command (Byte 3): decimal 73; hexadecimal 0x49
Parameter: no
Reply (Byte 3): decimal 89; hexadecimal 0x59
Parameter: Data
The current measured values and switching output recognition are read whilst taking into account the settings which
alter the characteristics (4 mA point, 20 mA point, Min., Max., autom. centre ...).
74
is set to high)
1
Decimal Hex.:
129 81
5 05
81 51
1 01
84 54
Decimal Hex.:
129 81
4 04
65 41
68 44
Sensor's reply telegram
Designation
1. Byte Address
2. Byte Length
3. Byte Reply
4. Byte Check sum
Parameter format
12 bit data item Data 3
Sensor's reply telegram
Designation
1. Byte Address
2. Byte
Length
3. Byte Reply
4. Byte
Data
5. Byte
6. Byte Check sum
Parameter format
12 bit data item:
Data 3 with switching output recognition
FT 50 RLA Disctance sensor - GB - 068-13671 - 20.04.2009-05
Mounting and
operating instructions
Decimal Hex.:
129 81
4 04
89 59
92 5C
Decimal Hex.:
129 81
6 06
89 59
64 40
0 00
30 1E