UK
• Check the hydraulic hoses on a regular basis, however, every six months as a minimum due
to any cracks, wear and tear, etc. Replace any defective hoses immediately.
• Hydraulic hoses lasts for no more than 5 years.
New hydraulic hoses must be identical to the manufacturers specifications.
Several markings are located at your machine, which contains safety regulations and other
instructions to inform about correct operating.
Please read these instructions carefully, and make the driver aware about the markings and safety
regulations in this Operating Instructions. Keep the markings clean and readable. If they are not,
they must be replaced.
Safety and other markings on the machine
Top-Strigle 3,0 – 4,0 – 5,0 – 6,0 – 7,0 – 8,0 m 2 Bars
Markings on the machine
Study the Operating Instructions thoroughly before any
operation of the machine and observe all safety
instructions.
Plate with number and year of manufacture.
Plate with number and year of manufacture.
Take care that no persons are within the machine's
hazardous area during the unfolding and folding procedure.
8
Back to the table of contents
30-11-2020