Xtralis VESDA LCD Programmer Module Product Manual page 40

Xtralis VESDA LCD Programmer Product Guide
Scrn
Description
No.
103. Factory Defaults -
• Factory Defaults - To restore factory defaults, highlight Restore and press
• Defaults OK - Highlighting Start and pressing
Default settings and clear faults 12, 30, 31, 33, 34, 35, 38, 57, 68 and 72.
104. Communications - The Communications screen allows settings for:
• Net Delay - This function sets the maximum time for a message to travel around
the network and return to the originating device. If the message does not return
within the prescribed time, it is presumed lost and will be resent
• Prof. Port - This allows you to assign a preferred port for communication
• Health Check - This function sets the frequency of health-check messages sent
around the system
• Open-ended - In an open-ended VESDAnet loop select the port that is not
connected to the VESDAnet loop.
Parameter
Network delay
Preferred port
Health check
Open - ended
105. Miscellaneous -
• UL Version - A
specifications.
• Latch Alarms - This provides a YES/NO option to latch/unlatch all Alarms
• Latch Faults - This provides a YES/NO option to latch/unlatch all Faults
• GP Input - The GP Input permits setting the general purpose input functions.
For details on GPI functions please refer to the VLP Detector Guide.
106. Ancillary Devices - Should be put under the same flow line as detectors. Select
the device by highlighting it and press
107. Display/Relays - Should be put under the same flow line as detectors. Select the
Display/Relay and press
108. Status - Displays the current status of the Display/Relay
• Faults - List of faults generated for Display/Relay connected to VESDAnet
• SW Version - Displays the software version of the Display/Relay
• Cfg Code - This is a configuration code set during production
34
Default Minimum
15 seconds 10 seconds
A N/A
45 seconds 40 seconds
none N/A
against this indicates that the device is set to meet UL
Parameter Default
UL Version Enabled
Latch Alarm Enabled
Latch Fault Enabled
↵
.
↵
.
↵
will acknowledge Factory
Maximum
45 seconds
N/A
60 seconds
N/A
Xtralis VESDA
®
Min.
Access
Level
↵
.
DST
ADM
DST
ADM
DST
USR
USR
USR
www.xtralis.com