Xtralis VESDA LCD Programmer Module Product Manual page 24

Xtralis VESDA LCD Programmer Product Guide
Scrn
Description
No.
33. Relay Startup Mode - Displays the energize/de-energized condition for each relay.
If required, use the
relays.
34. Latching - This screen displays the latched/unlatched relay condition for different
levels of alarms and faults. In the latched condition the reporting of an alarm or a
fault continues to be reported even after the event is over. Manual intervention is
necessary to reset. If the condition is unlatched the reporting of the condition
automatically stops once the event is over. To latch an alarm or a fault place a
against the respective alarm level or fault. The isolate function is fixed for
unlatched and cannot be changed.
18
↵
+ -
and keys to change the energized/de-energized state of
Parameter
Relay Startup Mode
Relay 2 & 3 energized
Relays 1, 4-7 (4-12)
Parameter
Latching
Sector (1-4)
Fire 2
Fire 1
Alert
Scanning
Urgent Fault
Minor Fault
Isolate
Default
Energized
Energized
Default
N/A
Latched
Latched
Latched
N/A
Latched
Latched
Unlatched
Xtralis VESDA
®
Min.
Access
Level
ADM
ADM
www.xtralis.com