Xtralis VESDA LCD Programmer Module Product Manual page 26

Xtralis VESDA LCD Programmer Product Guide
Scrn
Description
No.
40. Miscellaneous -
• UL Version - A
specifications.
• Latch Alarms - This provides a YES/NO option to latch/unlatch all Alarms
• Latch Faults - This provides a YES/NO option to latch/unlatch all Faults
• GP Input - The GP Input permits setting the general purpose input functions.
For details on GPI functions please refer to the VLP Detector Guide.
41. VLS Detector - Lists functions available for accessing and managing the
properties of the selected VLS detector. Select the required option and press
42. Status - Displays the current Status of the Address
• Smoke Level - Displays the current smoke level in the VESDA Zone
• Alarms - If the detector is in alarm mode, the alarm stage is displayed
• Faults - List of faults generated for each device assigned to the Address
• Isolated - The isolated status is reported if the detector has been isolated
• Current% Flow - Reports the current percentage of air flow through each pipe
• SW Version - Displays the Software Version in the detector
• Cfg Code - This is a configuration code set during production
43. Scan Status - This screen shows the smoke level for each sector in use during a
scan sequence (automatic or manual).
44. Event Log -
• View Events
• Select Events
45. View Events - Lists a log of events
20
against this indicates that the device is set to meet UL
Parameter
UL Version
Latch Alarm
Latch Fault
Default
Enabled
Enabled
Enabled
Xtralis VESDA
®
Min.
Access
Level
ADM
DST
USR
↵
.
USR
USR
USR
USR
www.xtralis.com