Table of Contents
Advertisement
3. Installation
3.2 Installation
3.2.1 Leveling the Device
· If the device is not installed horizontally, it may cause vibration, noise or
malfunction.
1. Place the device on a hard and flate place.
2. Put the leveler tool on the device.
2. Turn the leveling foot on the botton of the device to level the device.
▶ Adjust the leveling foot so that the bubble in the leveler tool is at the center of the line.
Technical Support :+82-2-3452-8966 / techsupport@ihanil.com
Leveling Foot
Bubble in the leveler tool is
at the center of the line.
9 / 23
Advertisement
Table of Contents
Need help?
Do you have a question about the Component R12 and is the answer not in the manual?