Mile Marker PE2.5 ES Installation And Operator's Manual page 5

When using this winch, safety precautions should always be followed
to reduce the risk of personal injury and damage to the winch.
1) Keeps hands and body away from Fairlead (cable
intake slot) when operating.
2) Secure vehicle in position before using winch.
3) Do not exceed winch load weight capacity (see
Winch Specifications).
4) Be certain winch is properly bolted to a structure
(or vehicle) that can hold the winch load.
5) Always use proper couplings when connecting
winch cable hook to load.
6) Do not lift items vertically. The winch was designed
for horizontal use only.
7) Do not overload the winch (see Model Specifica-
tions). It will do the job better at the load it was intended.
8) Do not use inappropriate attachments to extend the
length of the winch cable.
9) NEVER LIFT PEOPLE OR HOIST LOADS OVER
PEOPLE.
10) Never come in between the winch and the load
when operating.
11) Do not apply load to winch when cable is fully
extended. Keep AT LEAST 5 FULL TURNS of cable on the
drum.
12) After moving an item with the winch, secure the
item. Do not rely on the winch to hold it for an extended pe-
riod.
13) Examine winch before using. Components may be
affected by exposure to everyday weathering, chemicals,
salts, and rust.
Precautions
14)
COMPLETE TURNS of cable around the winch drum.
15)
side hull rollers, make sure the trailer is submerged in the
water when the boat is loaded by the winch. Attempting to
drag the boat on to the trailer while on land can cause winch
failure and possible injury.
16)
weakening, is knotted or kinked.
17)
load after moving.
18)
process of loading.
19)
tached to load to pull it. The cable could snap.
20)
when parked on an incline.
21)
5
Never fully extend cable while under load. Keep 5
When loading a boat into a trailer without reel or
Never operate winch if cable shows any signs of
Winch does not have a locking mechanism. Secure
Do not cross over or under the cable while it is in
Do not move vehicle with cable extended and at-
Apply blocks (such as a wheel choke) to vehicle
Re-spool cable properly.