Packing List; Additional Items Required; Recommended Installation Procedure; Optional Equipment Installation - FireplaceXtrordinair ProBuilder 42 CleanFace Installation Manual

Optional Equipment

Packing List


LP (Propane) Conversion Kit:
Rear Burner Orifice (#C55), Front Burner Orifice (#58), Pilot Orifice (0.14 LP), LP Regulator

Thimble (2-Piece
Assembly)

Pipe Shield

Header Shield

Lower Header Shield

The GSB2 and MV versions include a log set.

Wall Switch, Cover Plate, and Wire (GSB2 and MV only)

Remote (GSR2 only)

Additional Items Required


The GSR2 version of this fireplaces requires a log set (Oak = 94500771, Birch = 94500770)

Gas Line Equipment (shutoff valve, pipe, etc.)

Electrical Equipment (min. 14 gauge, grounded line)

Recommended Installation Procedure


Frame the opening for the fireplace. Make sure to allow for vent installation.

Set the appliance in place.

Install the vent, gas line and electrical hook-up.

Install the drywall.

Install the hearth (if applicable).

Install the facing (if applicable).

Install the mantel (if applicable).

Finalize the installation (see page 40).

Optional Equipment Installation


Before placing fireplace, install optional blower, remote, then Ember-Glo lights (leave ember glass out).

If using Propane, convert the appliance.

Install fireplace.

If using optional firebacks, install them.

Install ember glass (if used).

Install logs, ember chunks, and rockwool.
© Travis Industries
(for qualified installers only)
4/22/21 - 1493
7
PB42 CF Install