Vent Configurations; Minimum Vent Configuration - FireplaceXtrordinair ProBuilder 42 CleanFace Installation Manual

Optional Equipment

Vent Configurations

Minimum Vent Configuration


Use 5x8" Diameter Coaxial Vent

NOTE: Use the included thimble assembly whenever passing through a wall. (use on front and back of wall
penetration). See picture below.

The termination must fall within the shaded area shown in the chart. Use the indicated restrictor positions.

One elbow (30° or 45°) may be used on the horizontal run.

HINT: Use minimum vent kit "H" (96200332) from Travis Industries (additional vent may be required).
Use the included wall thimble when
penetrating a wall. Part #96200101
© Travis Industries
(for qualified installers only)
4/22/21 - 1493
27
PB42 CF Install