FireplaceXtrordinair ProBuilder 42 CleanFace Installation Manual page 15

Optional Equipment
3 The (2) header standoffs are screwed down flat to front edge of the top of the fireplace. On each
standoff, remove the screw that is closest to the center of the fireplace. Bend the legs at the perforations
as shown below and attach the foot of the standoff to the top of the fireplace using the screw removed
earlier in this step.
4. Attach the lower header shield to the header standoffs with 2 screws (see illustration below).
© Travis Industries
(for qualified installers only)
4/22/21 - 1493
15
PB42 CF Install