Standard Vs. Extended Position - FireplaceXtrordinair ProBuilder 42 CleanFace Installation Manual

Optional Equipment

Standard vs. Extended Position

There are two positions that the standoff/heat shield assembly can be installed. The standoffs are
shipped in the standard (forward) position.

If the unit is installed in the standard position no modification is needed.

If the unit is being installed in the extended position, the standoff/heat shield assembly must
be repositioned back ½" (see illustration below).
NOTE: see pages 11 & 35.for additional details about standard vs. extended installations.
© Travis Industries
(for qualified installers only)
4/22/21 - 1493
13
PB42 CF Install