72
CoolSmart TV - Fireplace Preparation
1
Remove the (4) knock-outs on the top of the fireplace and the (4) cover-plates located below the
knockouts (see illustration below).
2
Use snips or diagonal cutters to snip the tab on the knockouts. Press on the far side away from the tap to
pop the edge of the knockout up.
3
Grab on to the knockout with pliers and bend it back and forth until the remaining tabs break free.
Discard the knock out plate.
© Travis Industries
Installation
(for qualified installers only)
4/22/21 - 1493
PB42 CF Install