Barrier Screen Visual Deflector Adjustment - FireplaceXtrordinair ProBuilder 42 CleanFace Installation Manual

50
The latch can come loose from glass frame anchor. This occurs when it is turned 1/4 turn when it is disengaged.
Follow the directions below to re-install the latch if it becomes loose.

Barrier Screen Visual Deflector Adjustment

The barrier screen assembly has an adjustable visual deflector along the lower edge. If the assembly is adjusted
to accommodate thick facing material, adjust the deflector, as shown below, to block the view of the valve area.
1. Place the screen assembly face down on a soft surface to protect it from scratching. Locate the nuts
along the bottom edge of the deflector (in this example there are 3, your fireplace may have more).
2. Remove the nuts using an 11/32" nut driver. Move the deflector to the desired position and reinstall the
kept nuts. Test fit the assembly to the fireplace and make any adjustments as needed.
© Travis Industries
Installation
(for qualified installers only)
4/22/21 - 1493 PB42 CF Install