Optional Equipment
Use of a Non-Combustible Mantel Below Listed Mantel Clearances
Each gas fireplace has a unique set of mantel requirements. If you wish to place a non-combustible
mantel at a lesser height than specified in this manual, it will need to meet the following requirements:
The header (the framing member above the fireplace opening) must be non-combustible.
The facing must be non-combustible and extend to the header (or mantel, whichever is greater).
The facing must also span the entire width of the mantel.
See the illustration below for additional requirements.
© Travis Industries
(for qualified installers only)
4/22/21 - 1493
41
PB42 CF Install