FireplaceXtrordinair ProBuilder 42 CleanFace Installation Manual page 57

Optional Equipment
Ember Chunk Identification
There are (2) ember chunks, that look very similar, included with this log set. It is important that they are on the
correct side of the burner or they may cause flame impingement. Below is a picture that shows the ember chunks
side by side to aid with identification.
Left Ember Chunk
The left ember chunk and has a flat bottom and charred end. The chunk fits behind the bar, 2
the log grate. The charred end should be to the left. Place the ember chunk as shown below. Make sure the
chunk is positioned so it does not cover any burner holes.
Right Ember Chunk
The right ember chunk also has a charred end. The chunk fits behind the bar, 2
The charred end should also be to the left as shown below.
© Travis Industries
Left Chunk
(for qualified installers only)
View from above
View from above
4/22/21 - 1493
Right Chunk
from the left, of
nd
Do not block
burner holes
from the right, of the log grate.
nd
Do not block
burner holes
PB42 CF Install
57