24
Approved Vent Configurations
Restrictor Position
Intake and exhaust restrictors are built into the appliance to adjust the flow rate of intake air and
exhaust gases. Depending upon the vent configuration, you may be required to adjust the restrictor
positions. The charts for vent configurations detail the correct vent restrictor positions.
Exhaust Restrictor
NOTE: Certain vent configurations call for exhaust restrictor removal (position # 0). If this is the case,
remove the exhaust restrictor and replace the attachment screws in the firebox ceiling.
© Travis Industries
Installation
(for qualified installers only)
4/23/2021 - 1353
4415HO GSR2