Standard Vs. Extended Position - FireplaceXtrordinair ProBuilder 72 MV Installation Manual

Standard vs. Extended Position

There are two positions that the standoff/heat shield assembly can be installed. The standoffs are shipped in the
standard (forward) position.

If the unit is installed in the standard position no modification is needed.

If the unit is being installed in the extended position, the standoff/heat shield assembly must be
repositioned back ½" (see illustration below).
NOTE: see pages 13 & 38.for additional details about standard vs. extended installations.
© Travis Industries
Installation
(for qualified installers only)
4/22/21 - 1458 PB 72 MV/GSB2/GSR2 Install
15