Standard Vs. Extended Position - FireplaceXtrordinair ProBuilder 42 Linear Instruction Manual

14

Standard vs. Extended Position

There are two positions that the standoff/heat shield assembly can be installed. The standoffs are
shipped in the standard (forward) position.

If the unit is installed in the standard position no modification is needed.

If the unit is being installed in the extended position, the standoff/heat shield assembly must
be repositioned back ½" (see illustration below).
NOTE: see pages 13 & 40.for additional details about standard vs. extended installations.
© Travis Industries
Installation
(for qualified installers only)
Extended Position
6/3/19 - 1453
Standard Position
PB 42 & 54 MV/GSB2 Install