Terumo CDI 550 Operator's Manual page 14

The next figure shows the side panel of the monitor.
(16)
(15)
(14) Arterial and/or venous blood parameter module (BPM) cable-heads.
Modules for monitoring pH, PCO
Caution
Do not stare directly into the light generated by the BPM LED.
(15) H/S (Hematocrit/Saturation) Probe. Module for measuring continuous oxy-
gen saturation, hematocrit, and hemoglobin.
(16) Cable-head ports. Secures the cable-heads to the monitor when the monitor
is not in use, protecting the cable-head optics.
(17) H/S probe holder. Secures the CDI H/S Probe to the monitor when the moni-
tor is not in use, protecting the CDI H/S Probe optics.
(18) Hematocrit/saturation optical reference color chip. Allows connection of
the CDI H/S Probe to the optical reference color chip. When the monitor is
powered on, the system automatically performs a self-check.
(16)
, PO , potassium and temperature.
2 2
(18)
(17)
(14)
5000109
introduction 1-9