Advertisement
Step-by-Step Build Guide
Step 1. 3D Printing the Included Parts
Minimum Requirements:
200mm x 200mm x 200mm Print Bed Size
0.4mm Nozzle
Heated Bed (recommended)
Any Slicer Software
Your Options for Printing the Parts:
Option 2: Simplify 3D Factory Files
If you prefer to use Simplify3D as your slicer, open
the included Factory Files and edit the preset profiles
for your printer/material to ensure nice outer surfaces
and excellent layer bonding.
3D
Aeroventures
Option 1: G-Code
Transfer the included G-Code to an SD Card and run directly
on your i3 style printer using the materials we recommend. The
provided G-Code is for our recommended PLA / LW-PLA Hybrid build.
We've had good results with LW-PLA at 250º Celcius and standard
PLA at 225º Celcius but experiment with your printer to make sure
you achieve strong layer adhesion. If you wish to print this aircraft
from a different material, reference the included Slicer Settings PDF
and use your preferred slicer.
Option 3: STL + Your Preferred Slicer
If you prefer to use another slicer or create your own profiles
in Simplify3D, use the included STL files and reference the
included Recommended Slicer Settings PDF.
www.3daeroventures.com
w�w�3�A�r�v�n�u�e�.�o�
N�v�r S�o� E�p�o�i�g� N�v�r S�o� Q�e�t�o�i�g� N�v�r S�o� P�a�i�g
- 7 -
Advertisement
