Download Print this page

3DAeroventures Super Chipmunk Build Manual page 58

3d printed r/c aircraft

Advertisement

Tips For Your First Flight
Weather:
Due to the larger size of the Super Chipmunk, it can handle
mild to moderate winds. But It is recommended to fly on calm
days, with winds between 0 - 10 mph. With any R/C aircraft,
always ensure you are taking off and landing into the wind.
Keep in mind that LW-PLA is particularly susceptible to
warping in direct sunlight on hot days. Keep your aircraft in the shade when you're
not flying.
3D
Aeroventures
Pre-Flight Checks:
1. Double check all screws to ensure they are tight, including
servos, control horns, motor mount, and props.
2. Ensure servo extensions and all electronics are fully
plugged in.
3. Radio and onboard LiPo batteries are fully charged
4. It is recommended to test your radio from long range (30
or more paces away from the aircraft) to ensure your
radio signal is strong and you don't experience servo flutter.
5. Double check all controls are moving the proper direction!
www.3daeroventures.com
w�w�3�A�r�v�n�u�e�.�o�
N�v�r S�o� E�p�o�i�g� N�v�r S�o� Q�e�t�o�i�g� N�v�r S�o� P�a�i�g
- 5� -

Advertisement

loading

Related Products for 3DAeroventures Super Chipmunk